News

1) When clamping the workpiece, pay attention to the position of the code and the extension length of the nut and bolt on the pressure plate. In addition, the screw should not be on the top and bottom when locking the corner. 2) Copper males are generally processed for locking plates. Before starting the machine, the number of openings on the program sheet should be checked to ensure that they are consistent, and at

1. It can process continuous and smooth free-form surfaces that cannot be processed by ordinary three-axis or that are difficult to complete in one clamping. Such as the blades of engines and steam turbines, the propellers used in ships, and many shells and molds with special curved surfaces and complex cavities and hole positions, such as ordinary three-axis numerical control, due to the position of the tool relativ

On December 6, 2021, Jing Yihui, director of the Management Committee of Nantong Development Zone, Jiangsu Province, and other relevant leaders visited Foshan Guanbo Machinery Technology Development Co., Ltd. (hereinafter referred to as "Guangbo") to carry out on-site research and guidance; our general manager Xi Weibin , Director Chen Wende warmly received and participated in witnessing this investigation.

1: Preparation for start-up The CNC machining center machine tool first returns to the reference zero position of the machine tool (ie, zero return) every time it is turned on or the machine tool is reset by emergency stop, so that the machine tool has a reference position for its subsequent operations. 2: workpiece clamping Before the workpiece is clamped, all surfaces should be cleaned, and there should be no oil